Reinforced Snow Plow SVP-3 (SVP-3G)
Price: from 1 158 USD
For loaders and tractors 110 — 150 hp,
having a front hydraulic attachment.
Adapts to loaders MANITOU, JCB, Dieci, Claas, Bobcat, NewHolland, Merlo, Faresin, Caterpillar, Gehl, JLG, JohnDeere, Liebherr, Sanderson, Terex, Volvo, Weidemann, Genie and others.
The purpose of the SVP-3 dump (SVP-3G) is to move soil, sand, crushed stone, silage, sawdust, snow, backfill trenches, pits or for other types of work
The Snow Plow Reinforced SVP-3 (SVP-3G) has a rigid reinforced box structure, which has been tested on T-150 tractors since 2016. This allows you to perform heavy construction work, and will also ensure the speedy clearing of roads from snow.
TECHNICAL CHARACTERISTICS
Width / Height — 3000 / 1020
The weight of SVP-3 is 490 kg
The weight of SVP-3G is 540 kg
The width of the area cleaned in one pass is more than 2.4 m
The maximum possible thickness of snow that can be removed in one pass is 0.7 m
Raising and lowering takes place with the help of the own hydraulic system of the tractor or loader.
In the SVP-3 configuration, turning to the right or left at an angle of 30 degrees occurs mechanically using an insert.
In the SVP-3G configuration, turning to the right or left at an angle of 30 degrees occurs with the help of two hydraulic cylinders.
DUMP COMPLETE SVP-3 (SVP-3G):
high pressure hose;
a metal knife with a thickness of 16 mm and/or a knife made of reinforced rubber with a thickness of 40 mm;
in the SVP-3G configuration, there are two HC 80.40.250.550 cylinders.
OUR ADVANTAGES:
*rigid box structure allows you to move soil, sand, crushed stone, silage, sawdust, snow, fill trenches, pits.
*the shape of the shovel and the angle of attack ensure that the snow is «turned over» and does not lift it higher than the shovel.
*the clamping bar of the rubber knife simultaneously serves as a metal knife.
*mechanical or hydraulic rotation by 30 degrees to the left or right.
*adaptation for any tractor or loader
WARRANTY – 24 months for mechanical components, 12 months for hydraulic components
The dump truck SVP-3 (SVP-3G) due to its rigid design will ensure long years of service and comfortable operation of your equipment.